Concrete Sealer is a moderate, external, clear gloss finish sealer for all imprinted, stencilled and coloured concrete. This sealer can also be used for exposed aggregate and stone surfaces. It seals and dust proofs the surface while providing resistance to water, tyre marking, scratching and marring in hot climates.
It provides a deep rich look to any concrete finish and offers a high resistance to acid, oil, grease and stains from organic matter. Primary design applications are horizontal surfaces, however, can be used vertically.
Available in: 2L, 5L and 20L
2L = 6m2
5L = 15m2
20L = 60m2
Smart way to order, no time wasting, no queues, no petrol cost and no traffic jams
Coverage: Approximately 5-6m² / litre / coat.
Recommended Coats: 2
Application Temperature: 10 - 28°C
Application Method: Broom, Roller, Brush or Spray
Thinning: Concrete Sealer Thinners 5-10% for the first coat
Dry Time: 30 minutes—2 Hours (touch dry)
Cure time: 24 - 48 hours, full cure at 7 days.
Recoat time: Minimum 2 hours
Finish: Gloss (for lower sheen finish add Matting Agent to Concrete Sealer final coat)
Internal/External: External Only
Packaging: 2L, 5L, 20L